While accessing your Linksys Extender Setup page (web-based), you will see that it will allow you to configure the basic as well as the advanced settings of your range extender. In case, you are experiencing problems while accessing the setup page, don’t worry and stick with us for a short while, as extenderlinksyscom.support gives you an appropriate and definite solution to all your problems.
Failure in accessing Linksys Extender Setup page (web-based) occurs due to following reasons.
- Connection to the connected WiFi devices hasn’t been established yet.
- Linksys range extender is properly connected to the network but not detecting the type of active internet connection.
But before anything else, make sure that you are using the latest firmware of router. Router is the main element to configure your Linksys range extender.
- Consider Checking Your Computer Whether It Is Properly Connected With The Range Extender Or Not
First of all, be certain that you are connected to your WiFi network properly. In order to check this, grab your computer and click on the computer’s ‘wireless utility’. As soon as you do this, it will display the network name (SSID) which your desktop or a computer is physically connected. In case, you are not connected to the Linksys range extender, select the SSID (network name) from the list of the available networks, enter the network password and then hit ‘Join’ or ‘Connect’.
Note: The SSID and password are very important for Linksys Smart WiFi Login.
- Check the LED/ Indicator Lights on the Range Extender
Plug in your range extender into a power outlet. Remember, the source you have selected for your device to plug in supposed to be away from cordless phones, microwaves, baby monitors, etc. For more assistance, check the setup guide for manually configure Linksys Range Extender.
- Power Cycle the Linksys WiFi Range Extender
Disconnect your range extender from the power socket. Wait for ten minutes and plug it back again. If you are unable to see the stable LED lights on your device, place your range extender to somewhere else. Also, remember that router you are using to connect your range extender shouldn’t be hidden back of any device or under the cabinet.
- Check the Connectivity of your Computer
It may also interest you to know that a ‘ping test’ will help you in tracing the communication between the computer and the Linksys range extender. In order to ping the range extender, you have to obtain and maintain the default IP address of your device. To gain more information about the ‘ping test’ call our tech support team on toll-free number 1-844-726-2255.
Note: In case, the default IP address didn’t work for Linksys WiFi Range Extender Setup, ask our executives for extender.linksys.com support.
- Smart WiFi Setup Not Working? Reset Your Device To Factory Defaults
The process of ‘factory default’ will reboot the entire settings of your range extender and after that, you will need to run the setup CD again. You can also manually configure Linksys Range Extender. What you have to do, unplug all the wires that are physically connected to your range extender. After that, hold the reset button on the back of your Linksys device for 30 seconds. Release it after you see the blinking LED lights on the range extender.
Can’t connect to Linksys Extender? Ask our technicians for Support for Extender.linksys.com. Trust us as we have an instant solution to your annoying problems. Give our hand-picked executives to serve you. ‘We are hope of the people’. ‘We will never let our user down’. ‘We never leave our users in trouble’.